characteristic
Up to 5 times the output per unit area; Accurate to 6-stage separation, screening efficiency up to 90% - 99%; The use of silicone rubber ball, ultrasonic and other high-efficiency net cleaning device system will not block the screen hole. Dust removal and safe operation; The acceleration is 4-5 times lower than that of the vibrating screen, which improves the service life of screening parts and reduces maintenance; Low noise < 75db. Optimized weight balance, low foundation dynamic load.
Structural principle
★ the basic rotary motion is similar to manual screening. The eccentricity is adjustable from 25 to 40mm, and the low-speed V-belt drive is adjustable from 120 to 360rpm
★ the residence time of each product can be adjusted in the direction of the driving axis through the radial and tangential angle of the swing screen.
★ therefore, establish horizontal and throwing three-dimensional tumbling motion. The materials are evenly dispersed on the whole screen surface from the center to the outer edge, so as to spread axially in a spiral motion. Fine particles thus complete the whole screening process.
★ the horizontal and vertical accelerations increase with the movement of particles, and the particles close to the size of the sieve are successfully separated; Larger particles are transported to the outlet, where the flow is controlled by an adjustable guide device, which is another factor controlling the residence time of materials.
★ this process is repeated between each sieve layer.
