Cylindrical milling cutter.
For horizontal milling machine processing plane. The cutter teeth are distributed on the circumference of the milling cutter and can be divided into straight teeth and spiral teeth according to the tooth shape. According to the number of teeth are divided into coarse teeth and fine teeth. The spiral tooth rough tooth milling cutter has few teeth, high cutter strength, large chip-bearing space, and is suitable for rough machining; fine tooth milling cutter is suitable for finishing.
Surface milling cutter.
Also called disk milling cutter, used for vertical milling machine, end milling machine or gantry milling machine processing plane, end face and circumference have cutter teeth, but also coarse teeth and fine teeth. Its structure has three types: integral type, toothed type and indexable type.
End milling cutter.
For machining grooves and step surfaces, the cutter teeth on the circumference and the end face, can not work along the axial feed. When the end milling cutter has an end tooth passing through the center, it can be fed in an axial direction.
Three-edged milling cutter.
It is used to process all kinds of grooves and step surfaces, both sides and circumference of which have cutter teeth.
Angle milling cutter.
For milling into a certain angle of grooves, there are two kinds of single-angle and double-angle milling cutters.
Saw blade milling cutter.
For machining deep grooves and cutting workpieces, there are more teeth on the circumference. In order to reduce the friction in milling, there is a 1 °angle on both sides of the cutter teeth. In addition, there are keyway milling cutters, dovetail groove milling cutters, T-groove milling cutters and various forming milling cutters.
T-shaped milling cutter.
For milling T-grooves. [1]
