Technical Parameters of the Machine:
-
raw material scalemm:1000mm~1250mm×0.25~0.7mm×L
-
rolling depression speed: 17~20M/min
-
roller number:18~26 couple according to specific panel shape
-
roller material: adopt high quality No. 45 steel with chromed on surface
-
main axletree material: adopt high grade No. 45 steel finish machining
-
power of the main pump:4KW
-
pressure of hydraulic station: 10~12 Mpa.
-
electrical control system: Using PLC Control the quantity, length automatically, touch screen
-
equipment shape size: approximately 10000mm×1600mm×1200mm
-
Equipment total weight: approximately 7~10 Tons according to specific panel shape.
-
Roof panel forming Machine
Components:
Manual Un-coiler: 1 set
Roll-Forming M/C: 1 set
Hydraulic Cutting: 1 set
PLC Control System: 1 set
Product Rack un-powered: 1 set
- Technical Specification:
Manual Un-coiler: Un-powered; Load capacity = Max.5Tons;
Roll-Forming machine:
About 18steps to form; Material of Roller: No.45 steel with chromizing on surface
Voltage: 380V/50Hz; Main line speed:8~12 m/min;
Hydraulic Cutting:
Stop to cut Post cut,
Cutting tool material: Cr12, Heat treatment
PLC Control System:
Using PLC Control the quantity, length automatically, LCD screen,
Product Rack UN powered - Hydraulic Un-coiler:
Hydraulic system to expand coil inner hole;
Frequency Inverter to regulate turning speed,
Automatic stop device; Load capacity = Max.5Tons; - Material:
1 Coil Width: 1000mm~1250mm
2 Suitable Coil Thickness: 0.25~0.7mm
