Salt Spray Tester is used to create a salt spray fog in a controlled test environment. The anti-corrosion quality of materials protected by rust-proof paint, coating, electroplating, and anodizing can be tested in a chamber with capacities ranging up to 1440 liters.
Feature & Parameters
- The whole system using PVC plate, lined with the use of advanced three-dimensional reinforcement ring technology, structure and strong real, never deformation.
- Five direction heating system to ensure heat distribution within ±1oC.
- Highly advanced spray nozzle with accuracy of spray misting within ±0.3ml/80cm2.
- Saturated air with Henry's law. In order to heated humidification, and provided the necessary laboratory humidity.
- Temperature control uses P.I.D temperature controller within ±0.3oCaccuracy.
- The only use of early warning device test solution is too low, when the test solution is only enough for 5 hours and then spray the buzzer supplement will notify the user to ensure that the test of the value of the continuous spray.
- The only use the full detection system, when a failure occurs, you can display or alarm lights inform.
- With a spray and standing time period setting (for CAPA, SAE, ASTM).
-
Meets ASTM B117-03 the new improved design.
Technical Parameters
MODEL ITEM TMJ-9702(ECONOMIC) TMJ-9703(OVERSIZE)
TEST APPLICABLE NSS, ACSS, CASS NSS, ACSS, CASS
TEST TEMPERATURE 35oC±1oC or 50 oC±1oC 35 oC±1oC or 50 oC±1oC
INSIDE DIMENSION 600x450x400(WxDxH) mm 1600x1000x500(WxDxH) mm
OUTSIDE DIMENSION 1140x760x1190(WxDxH) mm 2300x1500x1200(WxDxH)mm
VOLUME 108 LITER 800 LITER
WEIGHT 60 KG 360 KG
TEST SPECIMEN (150x70mm) at angle of 20°±5° 24 PCS 136 PCS
SOLUTION TANK CAPACITY 15 LITER 60 LITER
TESTING TIME 90HR 180HR
POWER CONSUMPTION 220V SINGLE PHASE 2KW 220V SINGLE PHASE 8KW