Principle of operation and description: J114-type meter pulling 5-digit is used to accumulate and save the number of back and forth movements of the instruments or machines. It can take the count by the coupling of his shooting with instruments or machines input shaft. In addition to the digital readout display, it has a reset rotation device. After the return to zero, it can still start the cumulative count from zero. It is mainly used in the industries such as the textile, machinery, the circuit breakers, the mines, etc
parameters techniques:
specifying the digital display H × L 4.4 mm × 3 mm
Temperature ambient - 10?~ + 50?
ability to count up to 99.999
rate transmission 1:1
account =500 times/min speed
Angle pulling Angle pulling Max 43o, Angle pulling min. 380
Torque =8 N•cm
features mounting hole: f3.4 mm mounting hole: f4.5 mm Installation on a side not reset pull left arm is drawn counterclockwise right
Weight 80 g approx. 70 g approx. 75 g approx. 80 g
this series of products can be designed and manufactured according to the customer's requirement.
