Uses:
KCB5400-gear pump for conveying solid particles and fibers , non-corrosive, temperature no higher than 80 ℃, the viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) oil or nature similar to other liquid lubricants .
Applications:
KCB gear pump can be used in the oil transfer system, booster pump ;
Used as a transport fuel systems , pressure , fuel injection pump ;
In all industrial areas, can be used as a lubricating oil pump .
Features:
KCB5400 gear pump gears , shafts , pump, valve , shaft seal ( special requirements , the choice of magnetic drive , zero leakage structure ) formed. Heat treated gears have high hardness and strength , together with the operating shaft mounted in a replaceable bushings. lubrication within all parts of the media are using the output automatically when the pump is working to achieve .
KCB gear pump is designed within a reasonable drain and return tank, gear to withstand the torque force at work a minimum , thus bearing loads of small, wear , high efficiency .
KCB5400 gear pump is provided as an overload protection valve , a pressure relief valve for total reflux pump rated pressure of 1.5 times to exclude , can be adjusted if needed based on the actual discharge pressure within the allowable range . But note that this safety valve relief valve can not be long-term work , when necessary, be installed in the pipeline .
Overhang from the spindle end to the pump to see , for the clockwise rotation.
