The #EX-KVM-70E is an HDCP2.2 compliant KVM extender sending uncompressed 4K HDMI, USB HID and power alongside with IR and RS-232 control signals up to 131ft/40m over a single Cat6/6a cable (Cat5e 115ft/35m). The pair of devices is brought in to satisfy huge growing demands for interaction between source device and console.
The #EX-KVM-70E also features professional DDC emulation in the receiver, including both EDID and HDCP managements. EDID management indicates that any connected source could be tuned to output under preferred resolution, while HDCP management rules integrator could degrade HDCP2.2 to HDCP1.4 to engage older displays, which still have a broad existence in market. The two features powerfully eliminate chances of in-line interoperability and avoid HDMI transmission issues in repeated power cyclings.
The receiver unit RX-KVM-70E automatically re-clocks transmitted HDMI signal to display with digital jitter cleansing, enabling even better compatibility with displays over long haul HDMI transmission.
Features
▪Uncompressed 4K HDMI is transmitted pixel-by-pixel with original picture
▪Extends 4K UHD up to 131ft/40m (3840x2160@30Hz 4:4:4, 4096x2160@24Hz 4:4:4, and 4K@60Hz 4:2:0) over Cat6/6a
▪Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K
▪HDCP2.2 compliant
▪Supports USB HID extension to connect mouse, keyboard, touch screen, interactive board and projector
▪Supports DDC emulation incl. EDID and HDCP management
▪Support all known HDMI digital audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio
▪Remote power capability – only one external power supply needed
▪CEC pass through
▪Uni-directional IR and two-way RS-232
▪Includes a pair of wideband 30-60KHz infrared cables as a complete kit
▪Supports on-field firmware update