1.LED display, with keypad on the panel 2. Anti-tampering function:When the main control panel is removed or shaken from the wall, it will emit a high decible voice alert and auto dial the preset phone numbers at the same times.3.Learning code: It can work with different sensors and the user can easily add and remove the sensors 4.Compatible with wired and wireless sensors: The panel has 99 wireless zones, 8/16 wired zones. It can use with sensors like PIR Motion Sensor, IR Beams, Smoke Detector, Gas Detector, Panic Buttons and so on. 5.The system can use with External Siren, no build-in siren 6.Great user-friendly design , easy for wiring 7. Low-power alert Function: If the system was use with Central Monitoring Station, the panel will also send this message to the Central Monitoring Station. While if there is no Central Monitoring Station, the system do not have this function 8. Voice Instruction: The panel has voice instruction all the way when the user are remote control the system on phone. When alarm, the panel will alert which sensor, including Door Contacts, PIR Motion Sensors, Smoke Detector, Gas Detector and Panic Button, was triggered through voice instruction . And when you operate the system on the panel, there is no voice instruction. 9.Remote control:If the system do not alarm, the user can remote control the system to arm/disarm on phone after inputing correct password.When alarm, the system will send message to Central Monitoring Station first, then auto dial the preset phone numbers. Once the alarm phone has been connected, the system will alert the alarm to user, what¡ä more, the user can also remote control the system to arm/disarm on phone at that time 10.Back-up battery: When the AC power is cut, the system can continue to work because it will turn on the backup battery automatically. And when the backup battery lack of power, the panel will charge for it. 11.The system can work wit SSG Central Monitoring Station through GPRS. And the TTS Voice Module of the Central Monitoring Station will Alert the user which zone alarm.12.Great lighting protection design 13.Great customized design 13.Private alarm monitoring: Alarm monitoring without central plarform(That means the user set the number by himself and the alarm message will be handled by his friends or neighbour ) . The system will autodial the alarm phone by PSTN Network.16.we use high-quality,professional,industrial GSM module to disign and make our products. 17.Listen-in Function: After input correct password, the owner can hear the spot voice clearly. And the user can remotely prolong or cut listen-in on phone. What¡äs more the user can disarm the system during listen in.18.On the remote controller, the user can arm/disarm the system and do emergency calling. It is very convinient for the user.
- The panel has wired siren connection port and the user can set sound/mute Alarm for the system
21.Inteilligient control system to check that whether the user has handled
