Specification
1. Good characteristics of easy-operation
- Light viscosity and good fluidity
- Low shrinkage
- Favorable tension
- No deformation
Manual silicone rubber for shoe mold making
Manual silicone rubber for shoe mold making Application:
silicone rubber for shoe mold making is mainly used for shoe molds, sand casting, Shoe soles mold, sand casting,brushing mold,plaster models, simple products, products with non-complex patterns, as well as product models.
Manual silicone rubber for shoe mold making Datasheet:
Model HY530#
Appearance white
Operating time (mins 25 0C ) 30-50mins
Curing time(hours 25 0C) 3-5 hrs
Hardness (A°) 26-30
Viscosity (mPas -25 0C) 11000
Tensile-strength(kgf /cm2 ) ≥15
Tear-strength (kgf /cm ) ≥2.0
Elongation-break(%) ≥ 100
Manual silicone rubber for shoe mold making Using Instruction:
The component A of silicone rubber for shoe mold making is white silicone component B is the curing agent. take silicone of 100g and add 2% curing agent for mixing evenly. After silicone rubber and curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pour the liquid silicone rubber into the product to be duplicated or into the mold frame.
Manual silicone rubber for shoe mold making package:
Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B Curing Agent: 50g/bottle, 1kg/bottle
Need any help on silicone rubber, please feel free to contact Miss COCO
