The technical parameters of the close coupled pump test bench -BYT-B190 (close couple pump)
Dedicated transmission block body is continent for installing and replacement high-reliable diaphragm, maintenance free coupling.
The rotate speed, tempreture, the number of injections can be displayed in digits. The pressure gauge can indicate the fuel oil and lubricating oil pressure.
- Speed of main shaft: 0-4000 round /minute, bi-directional rotations are available
- The maximum number of the cylinders of the injection pump: two cylinders
- alternating-current frequency conversion speed :revolving speed ±1.5r/Min
- the main shaft power: 22KW
- fuel transmission motor power: 1.1kw
- the height from the spindle center to the workbench: 125mm
- the number of the oil measurement: 0-1000 times, one gear for every fifty times
- Revolving speed: counting Display precision. 4 bits
- The Display precision of pressure, the temperature of the fuel:3 bits
- The temperature of the fuel: 40±2℃, electrical heating and efficient heat exchanger water cooling
- The pressure of the fuel supply: low pressure: 0~0.4Mpa, high pressure 0~4.0Mpa
- The librating oil pressure: 0~1.0Mpa
13． Air source pressure : 0-0.25Mpa
14． The capacity of the fuel tank:100L
15． The fuel delivery of the fuel pump: greater than 10 L/minute
16． The volume of the glass measuring cylinder: 600ml
17．The standard injectors: CHINA DIESEL standard gush
18． The method of the lubrication: machine oil forced feed lubrication
19． The typed of cooling :cooling forcedly
20． Display interface: LED and CRT
21． The overall dimensions of the test bench : 2300X720X1750MM - Working surface of table: trislot working bench
23.1600Kg The weight of the test bench: 1600Kg
