Mineral oil non-silicon defoamer agent
1.Introduction
This product is a kind of high efficient non-silicon defoamer composed of mineral oil, poly ether, dispersing agent, emulsifier,high fat ; Have fast defoaming and bubble suppression effect and is not affected by temperature and pressure. Extensive applicability, persistent inhibit foam and defoaming in a wide PH range.
2.Physical property
Model Appearance Percentage
(25 degree) Water solubility Viscosity
202F Light yellow liquid 0.87-0.95g/ml Easy to disperse in water 50-1000cs
681-1 Dark transparent liquid 0.87-0.91g/ml Dispersion in water 50-1000cs
681-2 Dark transparent liquid 0.87-0.91g/ml Dispersion in water 50-1000cs
3.Application
High PVC coating, flat, half light paint, water-based sand mining coating, road sign paint, latex paint, engineering coatings
Light oil, ink, adhesives, glue, dilute acid latex, polyurethane emulsion
Synthetic rubber latex, latex, leather edge oil, water-based film adhesive, printing paste, VAE emulsion
Wastewater treatment, chemical industry
4.Usage and dosage
Used directly without dilution. Recommend segmented to add, to add in the process of pigment dispersion grinding amount of 40% or 60% ,add the rest in paint mixing stage; Suggested dosage: 0.1-0.3% of matte paint coating.
5.Packaging and storage: 25 kg plastic drum, stored in ventilated, dry place, storage temperature from 5 to 35 degree is better. Placed for a long time there will be a little layers; Shake well before use
