Control Valve, Valve
One in Service One Standby Controller for Water Treatment Systems 46010
Main Application & Applicability:
Used for one or two in service one standby water treatment systems
Be suitable for all of chinacoal meter type control valve.
Product Characteristics:
1.Wide voltage design,Transformer connect with power AC100-240V,50/60Hz.
2.Multi-programs optional,Valve has two programs of one in service one standby and two in service one standby. Two programs could be interchange via a switch.
3.Signal output,Valve has signal output connector. When one valve is in regeneration, signal is sent out.
Basic Setting & Usage :
2.1. One in service one standby usage
This controller can be connected with two meter type control valves with two solenoid valves which are installed on water outlet to realize one in service one standby system.
Before using, dial the switch on board to be: “1”. Connect wires as figure 1. All of connectors on board are passive switches. When it is closed, the indicator light on.
2.2. Two in service one standby usage
This controller can be connected with three meter type control valves with three solenoid valves which are installed on water outlet to realize two in service one standby system. Before using, dial the switch on board to be: “ON”. Connect wires as figure 2. All of connectors on board are passive switches. When it is closed, the indicator light on.
