Japanese Fujikura Fiber Optic Fusion Splicer Fujikura FSM-80S Splicing Machine with CT-30A Fiber Cleaver
Those features maximize productivity and operatability in splicing at the field.
Automated Wind-protector / Tube Heater
Reduced splicing steps, and the world's fastest splicing / heating times.
Innovative Carrying Case Design
A detachable built-in working table is inside for quick start of splicing
Environmental Resistance
The world's first 6-direction drop proof, dust and water resistant.
Wide Color LCD Monitor
High resolution 4.7 inch monitor with better visibility under daylight.
Powerful Li-ion Battery
200 splice and heating cycles per full charge.
Pre-installed Manual
Manuals including operation, troubleshooting and others are available through
the monitor
Specifications
PARAMETER VALUE
Applicable Fibers Singlemode (G.652 & G.657), Multimode (G.651)
DS (G.653), NZDS (G.655)
Cladding Diameter 80 μm to 150 μm
Coating Diameter 100 μm to 1,000 μm
Fiber Cleave Length 5 to 16 mm
Typical Average Splice Loss 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with
NZDS, measured by cut-back method relevant to ITU-T and IEC
standards
Splicing Time SM FAST mode — 7 seconds; SM AUTO mode — 12 seconds;
AUTO mode — 15 seconds
Arc Calibration Method Automatic, real-time and by using results of previous splice when in
AUTO mode, manual arc calibration function available
Splicing Modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core alignment data
Storage of Splice Result Last 2,000 results to be stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display
options with automated image orientation
Magnification 300X for single X or Y view, or 160X for X and Y view
Viewing Method Dual cameras with 4.73 inch TFT color LCD monitor
Operating Condition 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respe
Optional Items:
Description Model No. Note
Fiber holder FH-60-250 For 250um coating
FH-60-900 For 900um coating
FH-60-LT900 For 900um Loose Tube Fiber
FH-60-DC250 For Drop Cable
FH-60-IDC250 For Indoor Cable
FH-FC-20/30 For 2mm/3mm cord
Sheath clamp CLAMP-S70A Coating diameter from 100um to 1000um
(5mm to 16mm cleave)
Included in standard package
CLAMP-S70B 900um diameter loose tube fiber (16mm cleave)
DC power cord DCC-12 For ADC-11/ADC-13/ADC-18
Cigarette lighter socket type
DCC-12 For ADC-11/ADC-13/ADC-18, Alligator clamp type
Primary Coat Stripper PS-02 For single 250um fiber
Hot Jacket Stripper HJS-02 Standard
Standard Package:
Item Description Model No. Qty
1 Fusion Splicer FSM-80S with CLAMP-S70A 1 pc
2 AC adaptor/battery charger ADC-18 1 pc
3 AC power cord ACC-XX 1 pc
4 Spare Electrodes ELCT2-20A 1 pair
5 Cleaver CT-30A 1 pc
6 Battery Pack BTR-09 1 pc
7 U
