Our products are processed using CNC machines, we have fifteen sets of high-precision testing equipment and Eighty experienced skilled workers.
In recent years, we have been sold in lots of countries and regions in Europe and Asia and gained good reputation widely with excellent quality . In order to meet customers’ requirements and improve product quality, our company has already realized mechanical processing numerical control automatization production, and been committed to manufacturing products with best quality.
Machine
HEC NO.
Ref NO.
Description
PowerMAX 45
PowerMAX 65
PowerMAX 85
PowerMAX 105
H71857
220857
Swirl Ring 45/65/85Amp
H71994
220994
Swirl Ring 45/65/85/105Amp
H71947
220947
Swirl Ring FineCut
H01842
220842
Electrode 45/65/85Amp
H11941
220941
Nozzle 45Amp
H11819
220819
Nozzle 65Amp
H11816
220816
Nozzle 85Amp
H11930
220930
Nozzle FineCut
H11797
220797
Nozzle 65A/85A gouging
H11990
220990
Nozzle 105Amp
H11991
220991
Nozzle 105A gouging
H41854
220854
Retaining Cap 45/65/85Amp
H41953
220953
Retaining Cap 45/65/85A mechanized, ohmic
H41817
220817
Shield 45/65/85Amp mechanized
H41818
220818
Shield 45/65/85A drag-cutting
H41948
220948
Shield FineCut, mechanized, ohmic
H41798
220798
Shieldg 65/85A gouging
H41931
220931
Deflector FineCut, handheld
H41993
220993
Shield 105Amp mechanized
H41798
220798
Shield 105A drag-cutting
H91955
220955
Deflector 45/65/85A mechanized,unshielded
Technical Support:
Plasma cutting machine matters needing attention
cutting speed: best cutting speed range according to equipment illustrate selected or test to determine, due to the thickness of the material, different materials, high melting point, thermal conductivity and melting the surface tension and other factors, the cutting speed is also a corresponding change. The main performance: 1, cutting speed can be improved to improve the quality of the cut, that is slightly narrow incision, incision surface more smooth, and can reduce the deformation. 2, the cutting speed is too fast that cutting line energy lower than the required value, cut seam in the jet can't quickly melted cutting melt immediately blew and the formation of larger drag, accompanied by incision slag hanging, the surface quality of the incision down. 3, when the cutting speed is too low, because the cut is plasma arc anode, in order to maintain the stability of the arc's, anode spot or anode region must from recent arc cutting seam found near the conduction current place, at the same time will pass more heat to a radial jet, so make the incision became wide, on both sides of the notch of molten material in the bottom flange aggregation and coagulation, form is not easy to clean the slag hanging, and incision margin due to excessive heating and melting and the formation of fillet. 4, when the speed is very low, because the cut is too wide, the arc will even put o
