polycarbonate plastic glass
Our mission: Use the most honest attitude to give the best service to our customers.
Specifications of solid polycarbonate sheet
-
Thickness: 1mm-18mm
-
Max width: 2100mm
-
Length: customized
-
Standard color: clear, opal, green, blue and brown (special color can be customized)
101.jpg
Technical data of polycarbonate roofing sheet
Project of flat polycarbonate sheet
project-logo
The features of polycarbonate sheet
1) Good light transmission: Reaches 12%- 88% depend on color and thickness.
2) Impact resistance: 250-300 times that of ordinary glass and 20-30 times that of acrylic sheeting
3) Weather resistance: -40°C~+120 °C
4) Flame resistance: Rated class B1
5) Light weight and easy installation: 1/2 of glass of the same thickness
6) Ultraviolet resistance: With UV protective layer
7) Sound and heat proof
8) Fine plasticity, either cold bending or hot bending
Applications of polycarbonate sheet solid
1) Unusual decorations, corridors and pavilions in gardens and recreational and rest places
2) Interior and exterior decorations of commercial buildings, and curtain walls of the modern urban buildings
3) The transparent containers, front wind shields of motorcycles, airplanes, trains, ships, vehicles, motor boats, sub marines
4) Telephone booths, street name plates and sign boards
5) Instrument and war industries - windscreens, army shields
6) Walls, roofs, windows, screens and other high quality indoor decoration materials
7) Sound insulation shields on express ways and city overhead highways
8) Agriculture greenhouses and sheds
application01-logo
Installation method of polycarbonate
PC sheet installation(logo)
a) The diameter of the drill hole on the pc sheet should be bigger than the diameter of the screw about 50% , in case of expanding with heat and contracting with cold.
b) The distance of the drill hole on the pc sheet should be suitable, the longer distance, the larger thermal expansion. If the space of the drill hole is too short, it will limit the moving of the pc sheet.
c) The suitable distance of the drill hole on the pc sheet is 50cm. The suitable distance between drill hole and the edge of the pc sheet is about 3-5cm.
d) The diameter of the top of rivet should be the double of the shank. Make a gasket in case the pressure damages the pc sheet.
e) The screw should not tighten in case of breaking the pc sheet.
f) Should not use pvc gasket or pitch adhesive tape, because the chemical additive will be corrosive the pc sheet
g) The bending part should not use screw to fix the sheet when the sheet makes cold bend process. All the holes should use neutral silicone structural sealant to full in case the detergent permeate the edge of the sheet.
Production line & raw material:
raw material & production line-logo
Certificate
