Thickness : 0.18mm
Width : 45cm , 60cm , 92cm
Length : 1.5m/roll , 20m/roll , 25m/roll , 50m/roll
For size and colors,can according to customers’requirement
Function
A.Applied with Electrostatic technology, ungummed, easy to install, easy to move, and reusable;
B.Anti-UV, blocks 99% of the UV Rays;
C.Heat insulation, high-lights reduction;
D.Privacy protection, blocks unwanted view from outside;
E.Energy saving and anti-fading;
F.Various designs for your selection.
Application scope
Transparent glass, flat-topped surfaces of frosted glass, the flat-topped surfaces of sheet glass.
The method of clearing glass
1.Clear the dirt with soft cloth in some detergent, please.
2.Chemicals like diluents and gas are forbidden when clear the glass.
The methods of uncovering transparent back film
- When the transparent back sheet is too tight to uncover, stick a transparent adhesive tape on one angle and then uncover it.
- When the product is too big to uncover, make the transparent back flat to the top position, then uncover it from the side.
Instructions:
1.Clean the glass.
2.Spray some water on the glass (half dry and wet would be better.
- Peel off the transparent back film, then stick the self-adhesive decorative film on the glass directly.
4.Crape out the water and bubbles with rulers or cards.
5.Can stick on other glass freely (can be used repeatedly).
Notes!
1.Read the instructions enclosed before using and save it carefully, please.
2.Stick outside when use in some other vapor-water places, please.
3.Stick inside of the glass for the outside windows and doors, please.
