Introduction:
Protective clothing flame spread tester is designed and manufactured according to the stan-dard of ISO 15025 protective clothing burning test . It can test the state of flame spread of protective clothing under the impact of small flame. The instrument is a professional equip-ment, mainly applied for performance test of flame spread which protective clothing in fire by simulation technology.
Technical Parameters:
Items: Parameters
Dimension:1200mm X 600mmx 1200mm
Timer accuracy: 0.1s
Power supply: 220v，50/60Hz
Accessories:
1、304 stainless steel flame height gauge
2、2 pcs of gas pipe clamps
3、Instruction
4、Qualification Certificate
Application:
The instrument is applied for the testing of fire hazard using com-bustible materials, like fabric or other similar functional materials.
Technical Parameters:
- Combustion chamber is made of stainless steel, high corrosion resistance, long service life.
- The instrument is good appearance and generous in design with transparent glass window,easy to observe the test.
- All the sample rack are made of stainless steel; good-looking, corrosion-resistant.
- Standard burner; horizontal flame height 25mm ± 2mm; vertical flame height 40mm ± 2mm; nozzle diameter 0.19mm.
- Timer for automatic recording and storage.
- PLC with touch screen control system can achieve more intelligent test. Test data are auto- matically recorded and stored.
- Imported brand pressure gauge and control valve for more sable air pressure.
- Imported needle valve can precisely control the flame height. The flame is more stable.
- High intelligence, easy to operate.
- Two sets of sample racks for surface and bottom burning, all made of stainless steel.
- System offers automatic ignition and flame-out.
- Flame height gauge equipped, easy to adjust the flame height.
- Automatic ignition with high voltage of pulse electronic .
- The timing button coordinated with the PLC automatically records and stores the combus-tion time.
- No need of hand-held stopwatch or manuscript for timing. System can automatically record the test time and print test reports.
- Test time and flame enrichment time can be set on the touch screen so that can meet the test standards.
- Test program for surface burning and bottom-edge burning can be switched on the touch screen.
