Polymeric MDI
poly MDI M20S is the same as PM200 and 44v20L,it is widely used for PU rigid foam for insulation,shoe,mattress,freezer and so on
Product brands:M20S
Manufacturer: WANHUA
Specifications
Appearance
viscosity(25°C)
-NCO(%Wt)
Density(25°C)g/cm3
Acid value(ppm,HCI)
Hydrolysis chlorine(%)
Brown liquid
160~240
30.5~32.5
/
≤200
/
Applications
M20S can be widely used in the production of PU rigid insulation foams and polyisocyanurate foams.Other uses include paints, adhesives, sealants, structural foams, microcellular integral skin foams, automotive bumper and interior parts, high-resilience foams and synthetic wood.
Packing specifications
250-liter iron drum, 250 kg / barrel
1.Product Name: MDI Methylene diphenyl diisocyanate
Synonym: 4,4`-diphenylmethane diisocyanate
MF: C15H10N2O2
2.Specifications
MDI can be widely used in the production of PU rigid insulation foams ,we have 44v20L,M20S and PM200
Product chemical name:
4,4`-diphenylmethane diisocyanate
Relative molecular weight or atomic weight:
250.26
Density:
1.19(50°C)
melting point:
36-39 °C
boiling point:
190 °C
Flashing point:
202 °C
3.Characteristics and applications
PM-200 is a diisocyanato-diphenylmethane(MDI)-based composition containing some higher functionality isocyanates. The functionality is about 2.6-2.7. It is a dark brown liquid at ambient temperatures.
PM-200 can be widely used in the production of rigid PU foam heat-insulating materials; also used in isocyanurate foam, paint, adhesives, structural foam, cellular integral skin foam, automotive bumper and interior parts, high-resilience foam and synthetic wood, etc. Due to its unique composition structure, PM-200 can provide better flowability.
4.Storage / transportion
Since PM-200 is a reactive chemical, reaction with atmospheric moisture happens easily and leads to the formation of insoluble ureas and carbon dioxide gas, which can result in pressure build-up in closed containers and viscosity increase of the product. Containers must therefore be absolutely dry and carefully sealed after congested with nitrogen.
Containers of PM-200 should be kept properly closed and stored indoors at ambient temperatures(20-25°C) in a well-ventilated area. Storage at low temperatures(below 5°C) may lead to some crystallization; this material must, therefore, be protected from frost. If crystallization does occur, the material should not be heated to exceed 70°C.to melt it out, and should then be thoroughly agitated before use. Note that the product will decompose and give off gas above 230°C.
5.Usage
MDI is widely used in the production of PU rigid insulation foams and polyiso cyanurate foams.Other uses include paints, adhesives, sealants, structural foa ms, microcellular integral skin foams, automotive bumper and interior parts, high-resilience foams and synthetic wood.
