Rubber Powder Line is mainly used to produce the rubber powder with 5-30mesh from steel wire tire, inner tube, flap, etc the production process is as follows: waste tire cut off bead by bead cutter and the steel wire is separated from the bead by bead separator tire body is cut into strip with width 25mm by strip cutter width-25mm strip is cut into 25x25mm rubber block by block cutter the 25x25mm blocks is transmitted to the cracker to break to 5-30 mesh rubber powder, magnetic seperater clear the steel wire from the power. the production line is mainly including the machines as follows: 1. main machine: XKP-560, XKP-450 cracker 2. auxiliary machine: bead cutter, strip cutter, block cutter, steel wire separator conveyor belt, oscillating screen, small conveyor belt, small oscillating screen, double layer magnetic separator. 3. you can add a fibre separator to wipe off the fibre, and add a grinder to get 60-100 mesh rubber powder at the end of production line. if you want other different producing procedure rubber powder producing line, please contact . we can offer various of rubber powder producing line for your choice.