- Flat-bed, semi automatic automatic, screen printing machine of high reliability and good performance.
- Heavy Duty, High Strength and Rigid aluminum profile frame, with balanced footings.
- Low vibration and long durability of frame.
- Compact design of working space.
- Screen front insertion for easy set-up.
- Convenient, one touch - two stages, pneumatic screen clamping system. (optional)
- Parallel lift of the printing head, for good ink control and stability.
- Sturdy, four post lifting of the printing head, driven from a single powerful electric drive.
- Four post movement synchronized via a dampened double row chain system.
- Three adjustable positions for the printing head: Lower position for printing, mid position during idle, cleaning position up to 300 mm.
- Fine pitch and precise, Three Axes register control with 0.1 mm. dial indicators, located on the frame holding system.
- Precise Off-contact adjustment on the four corners of the screen.
- Peel-off device, allowing the progressive separation of the screen from the substrate.
- Peel height, rate and start point of peel-off, fully adjustable by operator.
- Squeegee/Flood Bar movement with double guided pneumatic cylinders.
- Micro-adjustable height for squeegee pressure and flood bar contact.
- Individual air pressure regulation of the squeegee cylinders.
- Printing Head features a solid construction made from strong aluminum profile.
- The Printing Bridge, supported and guided by two sturdy linear guides, is driven by trigger belts for smooth and precise operation.
- The Printing Bridge is driven by an AC motor with inverter and stops precisely.
- Print starting point and stroke length is fully adjustable by operator.
- Individual speed adjustment of the print and flood cycles, from the operator panel.
- Angle adjustment of squeegee holder.
- Fast and easy removal of squeegee/Flood bar assembly.
- Table bed driven by powerful servo motor for speed and precision. Possibility to adjust starting-stopping position as well forward and return speeds.
- Strong and flat printing table moves forward on two high precision linear guides.
- Powerful table vacuum operates at low noise levels. Inbuilt blowback feature can be optionally added.
- Vacuum function can be chosen as on or off. Pre-vacuum function can be set by operator.
- All functions controlled by fast and powerful PLC.
- Possibility of three working cycles: Manual with possibility of jogging for set-up functions; Single cycle operated by a switch or food pedal; Continuous cycle with operator adjustable dwell timer.
- Multiprint function can be set as many as desired. During multiprint function the table bed is fixed and the vacuum is on until the end of the function.
- Easy and user friendly, lexan top operator panel.
- Fault messages on operator panel screen, leads the operator to fault finding.
- Operator panel on pedestal can be transported to either sides of the machine, practical for le