Single-sided PCB with 1.6mm Board Thickness and 0.25mm Minimum Hole Diameter, 6-hour Rigidity.
Finished board area: 560 x 610mm
Line width and spacing: 0.1mm (minimum)
Copper thickness in hole: 25.0 x 956m
Pad diameter inner layer: 0.5mm (minimum)
Hole diameter: 0.25mm (minimum)
Board thickness: 1.6mm
Hole tolerance:
PTH: +0.075mm
NPTH: +0.05mm
Hole location tolerance: +0.075mm
Profile tolerance CNC routing: +0.15mm
Profile tolerance CNC punching: +0.15mm
Solder mask bridge ability: 0.1mm
Solder mask rigidity: 6 hours
Solder able test: 245C 5 seconds
Packing:
Inner: vacuum/plastic packing
Outer: standard carton packing
