VoIP Phone
VoIP phone supports 3-way conference,distinctive ring tone, full duplex hand-free,and provides two 100Mbps ethernet port ,which is used for router and bridge.It is convenient to view in-call and out-call.
Features:
Voice Codec:G.711,G.723.1,G.729A/B
VAD(Voice Activity Detection)with
CNG(Comfort Noise Generation)and PLC
(Packet Loss Concealment), Dynamic Jitter
Buffer
Web/Telnet configuration
PPPoE,DHCP Client/Server
Call hold,call waiting,call forward do
not disturb,direct IP calling Blind
transfer attended transfer
3-way conference
Voice Mail
High fidelity wideband audio, full-duplex speakerphone with advanced acoustic echo cancellation
Dual switched auto-sensing 10/100Mbps network ports with integrated PoE
Specification:
Interfaces
Network interface
2*10M/100MBPS auto-sensing RJ45 Porst
LED indicators
Message Waiting indicator
Voice, Modem
Voice over packet Capabilities
G.165 and G.168 with 32, 64 or 128 ms tail length
Voice Compression
G.711, G723.1, G.729 A/B,ADPCM, ILBC
DHCP Client/Server
Yes, NAT Router or Switched Mode
Qos
DiffServe,TOS, 802.1P/Q VLAN tagging
IP Transport
RTP/RTCP & PPPOE
Signaling
DTMF Method
RFC 2833, SIP Info, H323 Event
IP Signaling
SIP(RFC 3261)over UDP
Provisioning
TFTP,HTTP
Security
Management
Syslog, WEB browser, Telnet, Voice prompt
Physical
Universal Power Supply
Output:12VDC, input::100-240VAC/50Hz
Dimensions
190mm×170mm×100mm
Weight
0.7kg
Temperature
32-104° For 0-40°C
Humidity
10%-90%
Additional Features
Caller ID
Bellcore Type 1 & 2, ETSI,BT,NTT, and, DTMF-based CID
Polarity Reversal/Wink
Yes
Homologation
Safety
UL
Compliance
FCC Part 15;CE,EN55022/EN55024