In the GST100 stick sugar machine manufactured by Gold Paketleme Makina Gıda San. ve Dış Tic. A.Ş. With its more than 10 years' experience, the paper made with the polyethylene PE coating method (coil) 50-70 gr / m² paper density 200mm printed is mounted on the coil part of the machine. The paper on the spool is transmitted to the part of the 4 blades in a controlled way with the help of the coils.
In the portion of the knife, the 40 mm wide paper is fed to the neck and cushion portion of the machine by being divided into 5 equal parts. From this part, the papers pass to the channels on the cushion and are wrapped around the crystal sugar transmission pipes. These rolled papers are glued vertically from the back part through the resistors in the vertical jaw of the shape A + A on the sides.
After the adhesion operation carried out with the help of the vertical jaw, the crystal powdered sugar in the sugar tank of the upper part of the machine is transmitted by means of the piston order in the paper glued in such a manner as to take the sugar in the interval 1-10 gr. By gluing the lower jaw group to the lower and upper portion of the stick pack according to the photocell point on the paper, it evenly cuts the pack sizes. The sticky sugars cut by packaging are placed in the packages by being transmitted on the output conveyor. In addition, it makes it possible to produce differently to the dimensions of the standard stick sugar packet. The number of sugar to be produced according to the need of the consumer is entered on the screen and allows the automatic stop at the time of completion of the production of the machine. The PLC control system is used in the sugar stick packaging machine. From this, the operating speed of the system can be easily controlled according to the production capacity.
