Place de provenance : GOLDEN TRADE INTERNATIONAL

SURFACE ROUGHNESS TESTE SRT-6210

Profil : Fabricant - Producteur | Réf : PSL119053YH | Pays : China | Devise : | Incoterm : FOB | Export : | Import :

1.FEATURES
When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD.

  • Multiple parameter measurement: Ra, Rz, Rq, Rt
  • Highly sophisticated inductance sensor
  • Four wave filtering methods : RC, PC-RC,
    GAUSS and D-P
  • Built-in lithium ion rechargeable battery and control
    circuit with high capacity
  • Small in size, light in weight and easy to use
  • Can communicate with PC computer for statistics,
    printing and analyzing by the optional cable and the
    software for RS232C interface.
    Manual or automatic shut down. The tester can be
    switched off by pressing the Power key at any time.
    On the other hand, the tester will power itself off
    about 5 minutes after the last key operation.
    The tester can memorize 7 groups of measurement
    results and measuring conditions for later use or
    download to PC.
    *Metric /Imperial Conversion
    2.SPECIFICATIONS
    Display: 4 digits, 10 mm LCD, with blue backlight
    Parameters: Ra, Rz, Rq, Rt
    Measuring Range
    Ra, Rq: 0.005-16.00um/0.020-629.9uinch
    Rz,Rt: 0.020-160.0um/0.078-6299uinch
    Accuracy: ≤±10%
    Fluctuation of display value: Not more than 6%
    Sensor :
    Test Principle: Inductance type
    Radius of Probe Pin: 5um
    Material of Probe Pin: Diamond
    Dynamo-measurement of Probe: 4mN(0.4gf)
    Probe Angle: 90°
    Vertical Radius of Guiding Head: 48mm
    Maximum driving stroke: 17.5mm/0.7inch
    Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional
    Evaluation length: 5l
    Driving speed:
    sampling length = 0.25mm Vt=0.135mm/s
    sampling length = 0.8mm Vt=0.5mm/s
    sampling length = 2.5mm Vt=1mm/s
    returning Vt=1mm/s
    Profile digital filter
    Filtered Profile: RC
    Filtered Profile: PC-RC
    Filtered Profile: Gauss
    Non-Filtered Profile: D-P
    Resolution : .001μm if reading <10μm
    0.01μm if 10μm≤reading<100μm
    0.1μm if reading ≥100μm
    Evaluation length : 5 cut-off
    Power Li-ion battery: rechargeable
    Operating conditions: Temp. 0~50℃
    Humidity

Type de l'annonce : Offre de produit

Référence de l'annonce : PSL119053YH

Référence de l'annonceur : REF-95985

Devise :

Incoterm : FOB

Catégorie: Instruments for physical or chemical analysis

Mots clés : measuring instrument | digital surface roughness tester | portable surface roughness tester | hight accurcy gauge | electronic tester

Autres annonces de l'annonceur qui peuvent vous intéresser

Pourquoi importer avec Golden-Trade ?

Acheter à l'international n'a jamais été aussi simple et sûr :

Un interlocuteur unique

Un interlocuteur unique
du début à la fin

Une interface simple

Une interface simple
pour suivre vos opérations

Une gestion de bout en bout

Logistique "porte à porte"
on vous livre où vous le voulez

Une police d’assurance garantie de bonne fin

Garantie de bonne fin
jusqu'à 7,5 millions €

Crédit import

Crédit import
Achetez maintenant et payez dans 180 jours max *sous conditions