The bonding methods for pulley lagging splicing glue
Many people consults the bonding methods for pulley lagging splicing glue, before analyzing the bonding methods,let us judge which kind of adhesive can be used for pulley lagging?
As we all know, the bonding methods contains two kinds, one is traditional hot splicing pulley lagging, the other is cold splicing pulley lagging.
Today we will compare two kinds bonding methods,let us check about hot splicing and cold splicing bonding glue and bonding methods.
Cold splicing pulley lagging
Cold splicing pulley lagging, make use of cold splicing glue vulcanization affect to stick roller and rubber sheet together, without outside force to finish the bonding strength of pulley lagging with glue itself, so it is very strict to choose glue.
Here I will suggest one kind of glue for roller and rubber sheet, Ramimtech cold splicing glue sk313,which is a double component, high bonding strength, fast solidification, super bonding strength, this is the best glue right for the part.
Hot splicing pulley lagging, when do pulley lagging, be heated by vulcanizer, together with hot splicing glue to glue roller and rubber sheet. Through the splicing glue is not so strict to choose, but we also have to choose a high quality glue.
Here we suggest Ramimtech hot splicing glue sk823, high temperature resistance, flame redardant, high bonding strength, which is a high performance bonding strength adhesive.
Cold splicing glue bonding methods.
Clean up the residue gum from roller, then sanding the roller surface circle around with angle grinder L1202. Then brush away the dust from roller surface. Then deeply clean with cleaning solvent sk353, and guarantee no remain on roller surface.
Brush metal primer sk363 on the washed roller surface, wait it totally dry. (enhance the bonding strength with metal and rubber sheet, avoid the rubber sheet break off from roller)
Stir cold splicing glue sk313with hardener according to 100:4 evenly, then brush once and wait it totally dry, then do second brush, meanwhile, brush the diamond rubber sheet on it backside(blue CN layer).
Wait the mixture totally dry, then combine the rubber sheet with roller closely, press it with rubber roller, then strike it with rubber mallet to avoid no bubble inside, at last use Ramitech extruder gun to fill it.and revise and sand the roller edge.
From above, we can see that cold splicing pulley lagging is simple and convenient, and hot splicing pulley lagging, we can not say it clearly with just two words, also we also need to operate it with professional construction group. I will not mention them one by one.
