Welded mesh fence system is a simple system mainly include welded mesh panels and steel post. We
use good quality low carbon steel wire or galvanized wire do the welding, then make several curves
based on the hight of the panels to make the panel rigid and strong. Normally 3cm spike wire will be
left at the top of the panels to make the fence jump over proof as well as good looking. For the surface
treatment of the panels we use electrostatic spray or PVC dipped coating. For the post ,we usually use
3 types of post, SHS/RHS post ,round section post and peach shape section post,and we use
galvanized then do electrostatic spray.
Features:
•Easy Installation
•Cost effective
•Nice looking
•Different options on color according to the using environment
•Strong anti rust and anti corrosion ability
•Different options of install clips such as metal or plastic
•Different options of post
Technical specifications:
Panel (Size in Width and Height)
•Width :2.00m,2.20m,2.50m
•Height:1.03m,1.23m,1.43m,1.53m,1.63m,1.73m,1.83m,2.03m,2.13m,2.23m,2.43m
Panel (Mesh Size)
•50x200mm
•50x100mm
•55x200mm
•55x100mm
Panel (Wire Thickness)
•4.0mm
•4.5mm
•5.0mm
Panel (Finish):
•Galvanized and polyester powder spray
•Galvanized and PVC coated
Panel Rigid "V"
•From 2 to 5 which matching the height range from 1.03m to 2.43m
Post (4 options with different sections)
•60x60mm and 50x50mm SHS steel Post
•40x60mm RHS steel post
•50x70 and 70x100 Peach shape post
•48mm and 60mm Round section post
Post (Fittings-Rain hats)
•For SHS post
•For RHS post
•For Peach post
•For Round section post
Post (Fittings-Clamps)
•Plastic Clamps
•Metal Clamps
Packing
•In steel or Wooden Pallet
Loading
•1x40HQ
