Overview of Characteristic
● Support IEEE802.11b/g/n Wireless Standards
● Highly Cost Effective With High-Flying MCU: MC101
● Low-Power Applications with Excellent Power Save Scheme
● Support UART/SPI/PWM/GPIO Data Communication Interface
● Support Work As STA/AP/AP+STA Mode
● Support Smart Link Function (APP provide)
● Support Wireless and Remote Firmware Upgrade Function
● Support WPS Function
● Support Multi-TCP Link (Upto 5) Connection
● Support Internal/External Antenna Option
● Single +3.3V Power Supply
● Smallest Size: 22mm x 13.5mm x3mm, SMT17 Package
Class Item Parameters
Wireless Parameters Certification FCC/CE
Wireless Parameters Wireless standard 802.11 b/g/n
Wireless Parameters Frequency range 2.412GHz-2.484GHz
Wireless Parameters Transmit Power 802.11b: +16 dBm (11Mbps)
Wireless Parameters Transmit Power 802.11g: +14 dBm (54Mbps)
Wireless Parameters Transmit Power 802.11n: +13 dBm (HT20, MCS7)
Wireless Parameters ReceiverSensitivity 802.11b: -93 dBm (11Mbps ,CCK)
Wireless Parameters ReceiverSensitivity 802.11g: -85 dBm (54Mbps, OFDM)
Wireless Parameters ReceiverSensitivity 802.11n: -82 dBm (HT20, MCS7)
Wireless Parameters Antenna Option External: Line Pad Output / Internal:On-board Chip antenna
Hardware Parameters
Data Interface UART/SPI/GPIO
Hardware Parameters Operating Voltage 2.8~3.6V
Hardware Parameters Operating Current Peak [Continuous TX]: ~300mA
Hardware Parameters Operating Current Normal [WiFi ON/OFF, DTIM=100ms]
Hardware Parameters Operating Current Average. ~12mA, Peak: 300mA
Hardware Parameters Operating Temp -40℃- 85℃
Hardware Parameters StorageTemp. -45℃- 125℃
Hardware Parameters Dimensions and Size 22mm×13.5mm×3mm, SMT17
Software Parameters Network Type STA /AP/STA+AP
Software Parameters Security Mechanisms WEP/WPA-PSK/WPA2-PSK
Software Parameters Encryption WEP64/WEP128/TKIP/AES
Software Parameters Update Firmware Local Wireless, Remote
Software Parameters Customization Web Page Upgrade
Software Parameters Customization Support SDK for application develop
Software Parameters Serial command AT+instruction set
Software Parameters Network Protocol IPv4,TCP/UDP/FTP/HTTP
Software Parameters User Configuration AT+instruction set. Android/ iOS
Software Parameters User Configuration Smart Link APP tools
