Z –Section Sheet
Model Section size(mm) h mm
h b c t
Z100 100 55 20 2.0-3.0 40
Z120 120 55 20 2.0-3.0 adjustable
Z140 140 55 20 2.0-3.0 adjustable
Z150 150 67 20 2.0-3.0 adjustable
Z160 160 67 20 2.0-3.0 adjustable
Z180 180 67 20 2.0-3.0 adjustable
Z200 200 67 20 2.0-3.0 adjustable
Z250 250 78 20 2.0-3.0 adjustable
Z280 280 78 20 2.0-3.0 adjustable
Z300 300 78 20 2.0-3.0 adjustable
NO. NAME POWER REV PURPOSE
1 Electric molding machine 15Kw 1440r/min molding
2 Molding retarder 39r/min Molding
3 The most figure size length size Height
8500mm 2000mm 1700mm
4 The most ability of produce 12-21m/min
5 The weight of the machine About 8T
Feature: Our C&Z section roll forming machine is different from other manufactures.Our machine adopt pre-cutting, which can be used for a longer time than after-cutting.For after-cutting, when the cutter was used for settled times it will be out of use and you need new mould. It’s troublesome to change the new mould and it’s expensive. Our machine cuts before the C&Z shape is formed,so that the cutting part can be much saved. Our machine can cut about 500,000 times, whereas the machine from other manufacturers can only cut 20,000 times at most. This pre-cutting technique was invented by our big boss, and in China only we master this technique.
Usage:The Z-shaped purlines formed by this machine have excellent anti-bending property and are easy to install. They are widely used as the supporter of roof and wall in large-scale and mid-scale construction, such as factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, garden and so on.
