Introduction
PIR is a passive infrared detector or physical sensor, the sensor doesn’t emit any energy but only passively receive and detect infrared radiation from outside. Under room temperature, all items have radiation. Human beings are warm-blooded animal with stable infrared radiation, are most easily to be detected. That’s why we also call it body sensor. PIR send messages via Z-wave network to the Z-wave main controller. In the Z-wave network communications, PIR can be connected to any Z-wave main controller, Different countries or areas, the radio frequency is different of the Z-wave network. In the communication between the PIR and Z-wave main controller, PIR can only send messages, not be able to receive messages. When the PIR is triggered, PIR will send message to the Z-wave main controller, and associate devices to work through the Z-wave main controller. The PIR is battery powered, is small and can be installed easily.
Parameters
- Model: ZIB-PR01Z, ZIB-PR02Z
- Compatible with 300 series and 500 series
- Function: motion, light sensitivity, temperature(optional) detection
- Range: up to 50m outdoor, 30m indoor
- Power supply: CR123A x 1
- Standby current: 16uA
- Battery life: 1 years
- Radio Protocol: Z-wave
- Radio Frequency: 868.4MHz EU; 908.4MHz US; 921.4MHz ANZ; 869.2MHz RU
- Detection range: 7 meters
- Viewing angle: 90 degree
- Operation temper: 0-40℃
- Storage temperature: 0-60℃
- Product size(LWH): 45 x 45 x 48mm
Features
• Use passive IR sensor to detect what is moving.
• When the PIR is triggered, LED light flashes in the detection area.
• Easily install with screws or sticker on the wall or the table.
• When there are people or animal that is moving in the PIR detection area, PIR will send alarm messages to the Z-wave main controller.
• Compatible with any Z-wave main controller.