For testing density of Solid/Liquid Industry standard
Solid operation mode: only two steps Liquid operation mode
Principle: According to the standard of ASTM297-93, D792-00, D618, D891, GB/T1033, JISK6530, ISO2781, and adopting the buoyancy method of Archimedean principle, can accurately and directly show the measuring result.
Functions:
- It has the function of showing mixture proportion; it is suitable for researching and developing new materials.
- It has the function of HI limit and LO limit, can judge whether the density of the sample is appropriate or not, and it has the buzzer.
- The measuring is fast, only two measuring steps, the density and volume can be showed immediately.
- It has the RS-232C interface, can easily be connected to the PC and the printer.
- It adopts design of big tank, this can decrease the inaccuracy caused by supporting wire’s buoyancy.
- It has the liquid mode, and the optional equipment can be chosen. It can satisfy the testing of solid and liquid.
- GP-120S has the function of density and volume change (can set the time of 1, 10, 30, 60sec)
GP-120S
Model GP-120S GP-300S
Measuring Time About 5 seconds
Measuring Range 0.001~120g 0.01g 〜 300g
Density Precision 0.0001g/cm3 0.001 g/cm3
Value Showed: Density, Volume
GP-300S
Temperature compensation The solution temperature can be set from
0 - 49℃
Solution Compensation The solution density can be set to 19.999
Mixture density Can set the mixture ratio of two mixtures
Setting Can set the density of different mixtures
Optional Equipments
A: Glass Weight B: Stainless steel weight C: Acid and alkali resistant weight
D: Anti-corrosive water tank E: Printer
