Suitable for: Shoes materials, sponge, EVA materials, EPDM plastic industry.
Principle: The shoes materials, sponge, EVA materials are all permeable products, according to the standard of ASTM D 3574, JIS and GB/T, density measuring is judged by the measuring of water absorption.
GP-120Y Functions:
Mode1: Can directly show bulk density, wet density, apparent density, apparent porosity, water absorption, volume of open pores, volume of closed pores, total porosity of sponge, and EVA materials.
Mode2: Can directly show the density and volume of sponge and
EVA materials.
Mode3. Can directly show the powder true density of sponge and EVA
materials.
MH-300Y Functions:
Mode1: Can directly show the bulk density, apparent density, wet density, apparent porosity, water absorption of sponge and EVA materials.
Mode2: Can directly show the true density of sponge and the powder of EVA materials.
- By adopting the design of big tank, it can decrease the inaccuracy caused by supporting wire’s buoyancy.
- When using corrosive liquid as medium, the anti-corrosive water tank can be chosen.
- RS-232 interface, it can be connected to PC and printer easily.
Specifications:
Model GP-120Y MH–300Y
Measuring Range 0.001g 0.01g〜300g
Density Precision 0.001/0.0001 g/cm3 0.001 g/cm3
Testing Time About 10 seconds
Settings Settings of water temperature and solution compensation
Standard Interface RS-232
Optional Equipments
A: Vacuum siphon machine
B: Professional pycnometer
C: Moisture meter
D: Printer
