- High strength
The polyamide cord thread for florescence airbag is produced with high tension reinforced fiber. Acord thread has the strength more than 320N, and the cord fabric has consistent and reliable quality. Our company developed and manufactured high strength airbags with the higher strength steel wires and aramid fiber as skeleton materials on customers'request. - Wear resistance and anti-aging
An airbag often works in extreme conditions, for example, it is soaked in the seawater, insolated in the direct sunlight and rolled in send. Florescence airbag is produced with natural rubber in a reasonable formula. The practice proves that Florescence air bag has high wear resistance and anti-aging ability, and the service life is as long as 8-10 years. - Good air tightness
Our company uses high quality rubber, etc. As raw materials and the advanced manufacture process to assure that our products have good air tightness, especially air tightness of the assisted floating air Florescence assisted floating airbag can keep its pressure for 24 hours at work pressure, with the pressure drop less than 3% - Safety and reliability
Florescence airbag with the optimized structure design has the safety coefficient of 4-6 times, namely that its bursting pressure is 4-6 times its work pressure. Florescence airbag has a multi-channel airbag mouth to enhance the strength and air tightnees between the airbag body and mouth. - High kneading&compressing resistance and damping capacity
Florescence airbag, made in an integrated winding process, has uniform thickness and high strength and therefore higher kneading&compressing resistance and damping capacity.
High-pressure ship launching marine airbags are used for ship launching, ship landing, ship lifting, loading, and floating. They are widely used in cargo boat launching and landing, lifting and moving sunken ships, and salvaging stranded boats. Marine airbags have the benefit of not only saving labor and time, but investment costs. Additionally they are flexible and dependable.
The technology of applying pneumatic roller-bags to the launching and landing of ships relieves the restrictions of traditional slide-board technology which is commonly used in building small or medium size ships. Years of trial and error with this technology has increased the ability of launching 100-ton ships to 7,000-ton ships!
4-layer marine airbags that are 1.5m dia x 15m long contain a rubber content that is not less than 51%. The air-bags can safely hold 156-tons with a safe working pressure of 0.08MPa while rolling. When standing still the highest lifting pressure is 0.10MPa while holding 194-tons.
6-layer marine airbags that are 1.5m dia x 15m long contain a rubber content that is not less than 51%. The air-bags can safely hold 234-tons with a safe working pressure of 0.12MPa while rolling. When standing still the highest lifting pressure is 0.14MPa while holding 272-tons.
