Reasons to Purchase Our Signal Repeaters
Signal Repeater are very effective equipment that can offset the covering shortage of the base station of the mobile network, expand the cover range of the base station and fill the signal blind zone to ensure the convenient and pleasant communication. The only requirement signal repeater need for all this is at least middle range signal outside this area.
If you are in such a situation and thinking about your own repeater, please bare in mind that all our products have a huge list of advantages:
1) In our case more bars more calls. Signal booster provides the well-organized service that’s why after installation of the system the quality of the connection will be really great.
2) Signal Repeater require no additional wires being attached to your cell phone thus allowing you to use your cell phone without any extra troublesome accessories, in other worlds, no physical connection to your cell phone.
3) They are practical, beautiful, easy to install and with competitive price. You will not need to hire anybody to provide the installation of the equipment. You’ll be able to install it by yourself using only the manual list attached to your signal repeater.
4) Signal booster works at full duplex. It means that they are not only receiving the signal from the base mobile station but they also send the signal to the base mobile station.
5) Our equipment is completely safe. Signal booster don’t produce any radiation
6) Signal boosters are able to cover different coverage: from small to large. In this case you can decide which of signal repeater is suitable for your office or supermarket.
Key specifications:
Working system GSM
Frequency Uplink 890~915MHz Downlink 935~960MHz
Gain Uplink≥50dB Downlink 55dB
Output Uplink 10dBm Downlink 15dBm
Pass band ripple ≤1.8DB
I/O impedance 50Ω
Noise figure ≤6dB
Transmission delay ≤0.5μs
Ambient temperature -15°C~55°C
Power supply AC110V—240V DC12V
Size 134mm105mm28mm
Weight 400g
Connector N connector
Coverage area ≥100m²
Installation illustration:
A Use of mobile phones at the top of building or around the building to check out the direction of the strongest signal location.
B Select the appropriate location, and put the outdoor antenna fix to the wall or bracket.
C Select the appropriate location of the indoor locations (this location could be best that close to power and a well-ventilated place, sun-proof, rain-proof) Install the Indoor Repeater, and fix on wall or bracket.
D Put the outdoor antenna to the "OUT DOOR" connector and tightens it. Thus complete the outdoor antenna and Repeater's connection.
E After setting the suitable location of the indoor antenna and the installation place, then fixing the antenna.
F The indoor antenna and Repeater wiring, the indoor antenna connect one end of the interface and on the other end connect Repeater's "IN DOOR" port.
