PU8611 One Component Auto Glass Polyurethane Adhesive
Product Description
PU8611 is one component polyurethane adhesive with very good tensile strength and elasticity, primerless.
∎Key Features
1.Bond very well with surface of variety material such as all kinds of metal, lumber, glass, polyurethane, epoxy, resin, and coating material, etc. Good cohesive force and durable elastic sealing performance
2.One component adhesive with fabulous thixotropy, it’s convenient to apply with rapid curing speed
3.Excellent water, weather and aging resistance
4.Excellent wear-resisting property
5.Paintable and polishable
6.No sag or flow phenomena within 30mm perpends
7.Primerless
∎Typical Applications
1.Specially used for windshield and side glass of bus, car, railway vehicle (metro, high-speed rail), ship, spaceflight, engineering machinery vehicle, carriage and special vehicle
2.For glass steel and plastic accessories (car roof, side body and car front)
3.For bonding different material (such as metal, plastic, and glass) which requires high tensile strength and elasticity, the bonding can bear high mechanical deformation force
∎Technical Data Table
∎Directions for Use
Tool: Manual or pneumatic plunger caulking gun
Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating.
For cartridge
1.Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle
3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength
For sausage
1.Clip the end of the sausage and place in barrel gun
2.Screw end cap and nozzle on to barrel gun
3.Using the trigger extrude the sealant with equal strength
Attention of operation
Wear suitable protective clothing, gloves and eye/face Protection. After contact with skin, wash immediately with plenty of water and soap. In case of accide
