ALABINE CA Series Glass Metal Plastic Ink
Ⅰ、Description
ALABINE CA series inks, which based on special mixed resins, are of multi-functional features and use widely. These series inks with good adhesion are scratch resistant, alcohol resistant, sterilization resistant and anti-static
Ⅱ、Recommended Application
◆ Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, stainless steel, stone, marble, glass, etc.
◆ Recommended for: Windows screens, the phone keypad, the phone shell, the metal products, the stone crafts, the glass products, etc.
Ⅲ、Proposed Operation
Prepare: To clean the surface with ALATIVE SC5 treater （ALATIVE SC23 treater for the metal products and the glass products） and make sure non-dust, non-grease. To dilute the mixture with 3-20% ALATIVE SR6 thinner and then is ready（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. Mix the ink with the ALATIVE SN10 (15-25%, to total) activator completely.
Mesh count: 70T to 180T
Drying: Air dry in 12-24 hours, or forced dry at 120-150℃in about 40 minutes.
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
Ⅳ、Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 1kg/can, 5kg/barrel, 20kg/barrel
Ⅴ、Annotation
1, Test Condition (ALABINE CA Series Inks)
Substrate Printing Inks Remark
Harden Acrylic Board ALABINE CA-223 + ALATIVE SN10（5:1） 70OC heat cure in 45 minute,
Then more than one week later, About 25OC
2, Test Result of the Film (ALABINE CA Series Inks)
Item Test Method Result
Adhesive Force Cross cut, Peeling test with adhesive tape 100/100 Pass
Rigidity Angle 45O, 1200g, Pencil hardness 2H-3H
Water Resistance Water immersion in five weeks No Effect
Acid Resistance Immersion 30% H2SO4 aqueous solution in 10 hours No Effect
Alcohol Resistance 1200g, Back and forth wipe 100 times with alcohol cloth No Effect
Xylene Resistance 1000g, Back and forth wipe 50 times with xylene cloth No Effect
Gasoline Resistance 1000g, Back and forth wipe 50 times with gasoline cloth No Effect
Abrasion Resistance 500g, Back and forth scrape 500 times with eraser No Effect
Weatherability Back printing, Accelerated exposing aging test 800 hr.
