ALARATE (ALATHER) BN Series Rubber Ink
Ⅰ、Description
ALARATE (ALATHER) BN series inks, which prepared with the excellent hydrophobic resin, high quality pigments and fillers, and so on, are of excellent adhesion and good covering powder. The film is of excellent flexibility and is anti-tensile, washable, foldable, etc.
Ⅱ、Recommended Application
◆ Recommended substrate: PA（Polyamide Fiber）, PU, PET, PVC, Touch Rubber, etc.
◆ Recommended for: Leather, waterproof nylon, canvas, Oxford cloth, ribbon, mark, stickers, cards, Plastic articles with touch rubber coating, etc.
Ⅲ、Proposed Operation
Prepare: To clean the surface with ALATIVE SC7 treater and make sure non-dust, non-impurity. To dilute the ink with 3-20% ALATIVE SR6 thinner and then is ready（In order to regulate the drying rate of ink ,please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. In order to improve the adhesion and hardness of the film effectively, please add 15-25% (to total) ALATIVE SN13 activator.
Mesh count: 70T to 180T
Drying: Air dry in 15 to 30 minutes , or forced dry at 60℃in about 10 minutes (without activator).
Air dry in 12-24 hours, or forced dry at 70℃in about 50 minutes (activator added).
Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner.
Ⅳ、Color & Packaging
Color: More than 20 kinds of colors for selection and with professional mixed-color service.
Packaging: 1kg/can, 5kg/barrel, 20kg/barrel
Ⅴ、Annotation
1, Test Condition (ALATHER BN Series Inks)
Substrate Printing Inks Remark
Mobile phone（NOKIA） shell with touch rubber coating ALATHER BN-223 + ALATIVE SN13（5:1） 70OC heat cure in 45 minute,
Then more than one week later, About 25OC
2, Test Result of the Film (ALATHER BN Series Inks)
Item Test Method Result
Adhesive Force Cross cut, Peeling test with adhesive tape 100/100 Pass
Rigidity Angle 45O, 1200g, Pencil hardness 3H
Water Resistance Water immersion in five weeks No Effect
Salt Tolerance Immersion saturated brine aqueous solution in 24 hours No Effect
Wet Fastness Relative humidity 90%, 70 OC, In five days No Effect
Frost Hardiness -10 OC, Relative humidity 60%, In 24 hours No Effect
Abrasion Resistance 500g, Back and forth scrape 300 times with eraser No Effect
Weatherability Back printing, Accelerated exposing aging test 600 hr.
Punch Tolerance Drill hole, Cutting, Punch (3mm) No Effect to Connectivity
