Automatic Welding Machine of High-pressure Oil Pipe
Technical Requirement
It is mainly used to automatically weld angle shape circular seam of various hard tube. Make sure the welding specification is uniform, good appearance. It is easy to operate, reliable. Reach to the welding requirement.
Main Feature
- Workpiece is fixed, welding torch rotates, angle shape welding position.
2.Workpiece is positioned by central flange, clamped pneumatically.
3.Welding torch can be adjusted up and down, side to side, to meet various welding requirement.
4.OMRON CPM-30CDR PL,workpiece rotation speed is adjusted by Panasonic 0.375KW AC frequency inverter, stepless adjustment, to improve reliability.
5.Applicable to automatically weld pipe and angle shape flange, high welding seam quality, good and even form .100% superposition of welding seam, high automatic level.
6.Adopt Panasonic YM-350GL pulse digital welding power source, guarantee reliability of equipment.
7.It can accomplish the motion of automatic clamp, automatically approaching and keeping away from workepiece . Convenient and quick positioning, high precision.
8. Without any tangling of water pipes, electric wires, air tubes and cables. Guarantee the good condition of pipe line in the continuous work situation and reduce the failure rate.
9.In the welding process, welding specification and parameter can be changed and controlled at any time, to meet some special requirements.
Main Parameter
1. rotation speed 1-8r.p.m stepless adjustment
2.motor power 1.5KW
Welding Torch Adjustment
lift distance 100mm
left-right distance 100mm
4.dip angle 25°~ 60°
5.welding current 50-500A, 60% duty cycle
6.welding voltage 15-36v. stepless adjustment
7.welding wire diameter Φ0.8Φ1.6mm
8.working voltage 3phases 380V±15%
