Flange Circular Seam Welding Machine
1.Welding Requirement
It can accomplish the automatic circular seam welding of flange. Surface forming uniform and good appearance. Depth of fusion and width of fusion meet welding requirement, easy to load and clamp. Adopts MAG welding type, the welding process will be finished at one time.
2.Feature of Equipment
1) Welding torch will weld the workpiece vertically, after changing position, the workpiece rotates, the welding position is changeable.
2)The machine has high voltage and slow wire feeding performance, which guarantees reliable arc igniting. Machine also has low welding voltage and low current for filling crater.
3) It adopts push-type wire feeding mode, to guarantee feeding stability.
4)Welding torch can be adjusted longitudinally, which suits to various welding type.
5) PLC is used to control the whole machine operating,stepless adjustment, to improve equipment reliability.
6) The welding mode and welding specification can be preset , saved and recalled. Via touch man-machine interface, it is convenient to modify parameters and alternate status.
7) Welding torch can move up and down, side to side, and the angle can be adjusted, to reach welding requirement.
Main Parameter
1.lift motor power 0.75KW
2.rotation axis motor power 0.55KW
3.Welding Torch Adjustment
lift distance 100mm
left-right distance 100mm
4.dip angle 25°~60°
5.Welding Specification
welding voltage 15-36v. stepless adjustment
welding current 50-500A, 60% duty cycle
welding wire diameter Φ1.2-Φ1.6mm
shielding gas consumption 15L/MIN
working voltage 3phases 380V±15%
Applicable workpiece welding length: overlap amount step adjustment, precision is 1/900 perimeter
workpiece diameter(mm) φ100-φ300mm
